{"title":"ALVA","description":"\u003cp\u003eALVA is the cable and accessory brand built alongside RME in Germany, and it exists because the last two feet of a signal path ruin as many sessions as anything upstream of it. Multicore assemblies carry individually numbered fan-outs, so channel one at the console is channel one on the plug. D-Sub shells use the correct thread for the equipment they mate with, UNC 4\/40 for TASCAM-standard gear and metric where the equipment demands it, which is the detail generic cables get wrong and which strips a converter panel when forced.\u003c\/p\u003e\u003cp\u003eThe Pro series covers analog multicores in D-Sub, TRS and XLR terminations, AES\/EBU assemblies rated to 192 kHz at 110 ohms, cross cables that bridge the TASCAM and Yamaha pinout standards, optical TOSLINK for ADAT and SPDIF, and multi-mode fiber for MADI in simplex, duplex and drum-wound runs up to 300 metres. Conductors are heavier gauge than install-grade cable and the 14 mm jacket is built for repeated coiling rather than a single pull through a wall.\u003c\/p\u003e\u003cp\u003eVictory Musical Instruments is a veteran-owned, authorized ALVA and RME retailer in Miami, Florida. We can spec a full loom against your converter and console channel count rather than leaving you to work out the pinouts, and we hold the matching RME hardware. Call 844-687-4208 or arrange local pickup.\u003c\/p\u003e","products":[{"product_id":"alva-analog-multicore-dsub25-to-8-trs","title":"ALVA Analog Multicore Cable, D-Sub25 to 8 x TRS","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, D-Sub25 to 8 x TRS\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Numbered TRS fan-out, D-Sub: 25-pin male, UNC 4\/40 thread. Available in 2 m, 3 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 m, 3 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered TRS fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eADI-8 DS Mk III\u003c\/li\u003e\n\u003cli\u003eADI-8 DS\u003c\/li\u003e\n\u003cli\u003eADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro AD\/DA\u003c\/li\u003e\n\u003cli\u003eM-32 AD\/DA, M-16 AD\/DA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 2 m, 3 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered TRS fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"2 m","offer_id":44788729282611,"sku":"AI25-8TPro2","price":159.0,"currency_code":"USD","in_stock":true},{"title":"3 m","offer_id":44788729315379,"sku":"AI25-8TPro3","price":175.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729348147,"sku":"AI25-8TPro5","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AI25-8T_hires-1.jpg?v=1787852170"},{"product_id":"alva-analog-multicore-dsub25-to-8-xlr-female","title":"ALVA Analog Multicore Cable, D-Sub25 to 8 x XLR Female","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, D-Sub25 to 8 x XLR Female\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Numbered female XLR fan-out, D-Sub: 25-pin male, UNC 4\/40 thread. Available in 3 m, 5 m, 10 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 m, 5 m, 10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered female XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eADI-8 DS Mk III\u003c\/li\u003e\n\u003cli\u003eADI-8 DS\u003c\/li\u003e\n\u003cli\u003eADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro AD\u003c\/li\u003e\n\u003cli\u003eM-32 AD, M-16 AD\u003c\/li\u003e\n\u003cli\u003eMicstasy\u003c\/li\u003e\n\u003cli\u003eDTOX-16\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 3 m, 5 m, 10 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered female XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"3 m","offer_id":44788729413683,"sku":"AI25-8XPro3","price":169.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729446451,"sku":"AI25-8XPro5","price":229.0,"currency_code":"USD","in_stock":true},{"title":"10 m","offer_id":44788729479219,"sku":"AI25-8XPro10","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AI25-8X_hires-2.jpg?v=1787852180"},{"product_id":"alva-analog-multicore-dsub25-to-8-xlr-male","title":"ALVA Analog Multicore Cable, D-Sub25 to 8 x XLR Male","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, D-Sub25 to 8 x XLR Male\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Numbered male XLR fan-out, D-Sub: 25-pin male, UNC 4\/40 thread. Available in 3 m, 5 m, 10 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 m, 5 m, 10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered male XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eADI-8 DS, ADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro DA\u003c\/li\u003e\n\u003cli\u003eM-32 DA, M-16 DA\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC (analog outs)\u003c\/li\u003e\n\u003cli\u003eDTOX-16\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 3 m, 5 m, 10 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered male XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"3 m","offer_id":44788729577523,"sku":"AO25-8XPro3","price":179.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729610291,"sku":"AO25-8XPro5","price":239.0,"currency_code":"USD","in_stock":true},{"title":"10 m","offer_id":44788729643059,"sku":"AO25-8XPro10","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AO25-8X_hires-2.jpg?v=1787852190"},{"product_id":"alva-analog-multicore-dsub25-to-dsub25","title":"ALVA Analog Multicore Cable, D-Sub25 to D-Sub25","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, D-Sub25 to D-Sub25\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, D-Sub: 25-pin male, UNC 4\/40 thread, Cable Ø: 14 mm. Available in 1 m, 3 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 m, 3 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eADI-8 QS, ADI-8 DS, ADI-8 DS Mk III\u003c\/li\u003e\n\u003cli\u003e\u0026lt;\u0026gt; DTOX-16 I\/O\u003c\/li\u003e\n\u003cli\u003eM-32 Pro AD, M-32 AD, M16 AD \u0026lt;\u0026gt; DTOX-16 I\u003c\/li\u003e\n\u003cli\u003eM-32 Pro DA, M-32 DA, M16 DA \u0026lt;\u0026gt; DTOX-16 O\u003c\/li\u003e\n\u003cli\u003eOne cable is required for 8 channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 1 m, 3 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"1 m","offer_id":44788729708595,"sku":"ANA25T25TPro1","price":99.0,"currency_code":"USD","in_stock":true},{"title":"3 m","offer_id":44788729741363,"sku":"ANA25T25TPro3","price":129.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729774131,"sku":"ANA25T25TPro5","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/ANA25T-25T_hires-1.jpg?v=1787852199"},{"product_id":"alva-analog-multicore-8-trs-to-8-trs","title":"ALVA Analog Multicore Cable, 8 x TRS to 8 x TRS","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, 8 x TRS to 8 x TRS\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Numbered TRS fan-out, Cable Ø: 14 mm. Available in 2 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered TRS fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eADI-8 DS, ADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro AD\/DA, M-32 AD\/DA, M-16 AD\/DA\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC\u003c\/li\u003e\n\u003cli\u003eFireface 802, Fireface UC, Fireface UCX,\u003c\/li\u003e\n\u003cli\u003eFireface UFX, Fireface UFX II, Fireface UFX+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 2 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered TRS fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"2 m","offer_id":44788729806899,"sku":"T8T8Pro2","price":189.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729839667,"sku":"T8T8Pro5","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/T8T8Pro_hires-1.jpg?v=1787852208"},{"product_id":"alva-analog-multicore-8-xlr-to-8-xlr","title":"ALVA Analog Multicore Cable, 8 x XLR to 8 x XLR","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, 8 x XLR to 8 x XLR\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Numbered XLR fan-out, Cable Ø: 14 mm. Available in 2 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicstasy\u003c\/li\u003e\n\u003cli\u003eDMC-842\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC\u003c\/li\u003e\n\u003cli\u003eDTOX-16\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 2 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"2 m","offer_id":44788729937971,"sku":"X8X8Pro2","price":199.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788729970739,"sku":"X8X8Pro5","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/X8X8Pro_hires-1.jpg?v=1787852216"},{"product_id":"alva-analog-multicore-8-trs-to-8-xlr-male","title":"ALVA Analog Multicore Cable, 8 x TRS to 8 x XLR Male","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, 8 x TRS to 8 x XLR Male\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Individually numbered XLR and TRS plugs, Cable Ø: 14 mm. Available in 2 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually numbered XLR and TRS plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicstasy, ADI-8 DS, ADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro DA, M-32 DA, M-16 DA\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC\u003c\/li\u003e\n\u003cli\u003eFireface 802, Fireface UC, Fireface UCX,\u003c\/li\u003e\n\u003cli\u003eFireface UFX, Fireface UFX II, Fireface UFX+\u003c\/li\u003e\n\u003cli\u003eDTOX-16\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 2 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually numbered XLR and TRS plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"2 m","offer_id":44788730003507,"sku":"T8X8Pro2","price":189.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788730036275,"sku":"T8X8Pro5","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/T8X8_hires-1.jpg?v=1787852224"},{"product_id":"alva-analog-multicore-8-xlr-female-to-8-trs","title":"ALVA Analog Multicore Cable, 8 x XLR Female to 8 x TRS","description":"\u003cp\u003e\u003cstrong\u003eALVA Analog Multicore Cable, 8 x XLR Female to 8 x TRS\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is Cable Color: black, Individually numbered XLR and TRS plugs, Cable Ø: 14 mm. Available in 2 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually numbered XLR and TRS plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicstasy\u003c\/li\u003e\n\u003cli\u003eADI-8 DS, ADI-8 QS\u003c\/li\u003e\n\u003cli\u003eM-32 Pro AD, M-32 AD, M-16 AD\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC,\u003c\/li\u003e\n\u003cli\u003eFireface 802, Fireface UC, Fireface UCX,\u003c\/li\u003e\n\u003cli\u003eFireface UFX, Fireface UFX II, Fireface UFX+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 2 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually numbered XLR and TRS plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"2 m","offer_id":44788730069043,"sku":"X8T8Pro2","price":189.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788730101811,"sku":"X8T8Pro5","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/X8T8Pro_hires-1.jpg?v=1787852233"},{"product_id":"alva-aes-ebu-multicore-dsub25-to-8-xlr","title":"ALVA AES\/EBU Multicore Cable, D-Sub25 to 8 x XLR","description":"\u003cp\u003e\u003cstrong\u003eALVA AES\/EBU Multicore Cable, D-Sub25 to 8 x XLR\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is 192 kHz ready, Cable Color: black, Impedance: 110 Ohm. Available in 1 m, 3 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 m, 3 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e192 kHz ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHDSPe AES\u003c\/li\u003e\n\u003cli\u003eADI-8 QS, ADI-192 DD, ADI-4 DD, ADI-6432\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC\u003c\/li\u003e\n\u003cli\u003eMicstasy, DMC-842\u003c\/li\u003e\n\u003cli\u003eDTOX-32\u003c\/li\u003e\n\u003cli\u003eD-Sub25 male to 8 x XLR\u003c\/li\u003e\n\u003cli\u003eD-Sub25 male to D-Sub25 male\u003c\/li\u003e\n\u003cli\u003eD-Sub25 YAMAHA \u0026lt;\u0026gt; TASCAM\u003c\/li\u003e\n\u003cli\u003eD-Sub25 TASCAM \u0026lt;\u0026gt; YAMAHA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 1 m, 3 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e192 kHz ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNumbered XLR fan-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male, UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"1 m","offer_id":44788730298419,"sku":"AES25-4F4MPro1","price":142.0,"currency_code":"USD","in_stock":true},{"title":"3 m","offer_id":44788730331187,"sku":"AES25-4F4MPro3","price":189.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788730363955,"sku":"AES25-4F4MPro5","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AES25-4F4M_hires.jpg?v=1787852241"},{"product_id":"alva-aes-ebu-multicore-dsub25-to-dsub25","title":"ALVA AES\/EBU Multicore Cable, D-Sub25 to D-Sub25","description":"\u003cp\u003e\u003cstrong\u003eALVA AES\/EBU Multicore Cable, D-Sub25 to D-Sub25\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is 192 kHz ready, Cable Color: black, Impedance: 110 Ohm. Available in 1 m, 3 m, 5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 m, 3 m, 5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e192 kHz ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-Cable (input to output and vice versa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin AES\/EBU with TASCAM pin-out format and UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat RME Gear Does This Cable Work With?\u003c\/h2\u003e\u003cp\u003eALVA lists the following RME equipment for this assembly. If your unit is not named here, call 844-687-4208 with the model and we will confirm the pinout before you order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHDSPe AES\u003c\/li\u003e\n\u003cli\u003eADI-8 QS, ADI-192 DD, ADI-4 DD, ADI-6432\u003c\/li\u003e\n\u003cli\u003eOctaMic II, OctaMic XTC\u003c\/li\u003e\n\u003cli\u003eMicstasy, DMC-842\u003c\/li\u003e\n\u003cli\u003eDTOX-32\u003c\/li\u003e\n\u003cli\u003eD-Sub25 male to 8 x XLR\u003c\/li\u003e\n\u003cli\u003eD-Sub25 male to D-Sub25 male\u003c\/li\u003e\n\u003cli\u003eD-Sub25 YAMAHA \u0026lt;\u0026gt; TASCAM\u003c\/li\u003e\n\u003cli\u003eD-Sub25 TASCAM \u0026lt;\u0026gt; YAMAHA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 1 m, 3 m, 5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e192 kHz ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Color\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCross-Cable (input to output and vice versa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin AES\/EBU with TASCAM pin-out format and UNC 4\/40 thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Ø\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this work with my RME interface?\u003c\/strong\u003e\u003cbr\u003eALVA lists the compatible RME models on this page. If yours is not named, call 844-687-4208 with the model number and we will confirm the pinout before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"1 m","offer_id":44788730429491,"sku":"AES25T-25TPro1","price":145.0,"currency_code":"USD","in_stock":true},{"title":"3 m","offer_id":44788730462259,"sku":"AES25T-25TPro3","price":179.0,"currency_code":"USD","in_stock":true},{"title":"5 m","offer_id":44788730495027,"sku":"AES25T-25TPro5","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/439970.jpg?v=1787852251"},{"product_id":"alva-aes-ebu-cross-cable-yamaha-to-tascam","title":"ALVA AES\/EBU Cross Cable, D-Sub25 Yamaha to Tascam","description":"\u003cp\u003e\u003cstrong\u003eALVA AES\/EBU Cross Cable, D-Sub25 Yamaha to Tascam\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is D-Sub: 25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.), Thread: UNC 4\/40 \u0026gt; M 2.6 (metric). Available in 0.5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUNC 4\/40 \u0026gt; M 2.6 (metric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 0.5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUNC 4\/40 \u0026gt; M 2.6 (metric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"0.5 m","offer_id":44788730527795,"sku":"AES25Y-25TPro05","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AES25Y-25T05.jpg?v=1787852257"},{"product_id":"alva-aes-ebu-cross-cable-tascam-to-yamaha","title":"ALVA AES\/EBU Cross Cable, D-Sub25 Tascam to Yamaha","description":"\u003cp\u003e\u003cstrong\u003eALVA AES\/EBU Cross Cable, D-Sub25 Tascam to Yamaha\u003c\/strong\u003e is a professional \u003cstrong\u003eaudio cable\u003c\/strong\u003e built by ALVA in Germany for RME and other D-Sub and multichannel audio equipment. Construction is D-Sub: 25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.), Thread: UNC 4\/40 \u0026gt; M 2.6 (metric). Available in 0.5 m.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cable the interface was designed around, so the pinout is right and the channel numbers on the plugs match the ones on the screen.\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"vmi-benefit-bar\"\u003eFree shipping · Free local pickup in Miami · Financing at checkout\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eALVA is the cable and accessory brand built alongside RME, made in Germany to the same tolerances as the hardware it plugs into. Multicore assemblies use individually numbered fan-outs, so channel one at the console is channel one on the plug and there is no guessing during a load-in. D-Sub shells use the correct thread for the equipment they mate with, which is the detail generic cables get wrong.\u003c\/p\u003e\u003cp\u003eThese are the assemblies RME references in its own documentation for connecting converters, preamps and interfaces. Buying the matched cable removes a whole class of problem: wrong pinout standard, wrong thread, unshielded runs picking up hum, and connectors that back out of a D-Sub under vibration.\u003c\/p\u003e\u003ch2\u003eAt a Glance\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAudio cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable Lengths\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUNC 4\/40 \u0026gt; M 2.6 (metric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSourced to order, call 844-687-4208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhich Length Should I Order?\u003c\/h2\u003e\u003cp\u003eThis assembly is stocked in 0.5 m. Measure the run and add slack for service loops and strain relief at both ends. A cable pulled tight against a D-Sub shell will work its way loose, and on a rack that moves it will do it mid-session. If you are between sizes, call 844-687-4208 and we will help you pick.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eD-Sub\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25-pin male to 25-pin female AES cable 0.5 m (1.6 ft.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUNC 4\/40 \u0026gt; M 2.6 (metric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhy ALVA?\u003c\/h2\u003e\u003cp\u003eALVA is made in Germany by the same group that distributes RME, which is why the pinouts, threads and channel numbering match the hardware exactly rather than approximately. The Pro series uses heavier gauge conductors and a 14 mm jacket built for repeated coiling and road use rather than a one-time install.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine ALVA product?\u003c\/strong\u003e\u003cbr\u003eYes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. It carries the full ALVA manufacturer warranty, and we handle warranty claims for cables purchased from us.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\u003cbr\u003eThis item is sourced to order. Call 844-687-4208 and we will confirm current lead time before you buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo you offer local pickup?\u003c\/strong\u003e\u003cbr\u003eYes. Free local pickup is available at our Miami location once the item arrives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich D-Sub pinout standard does this use?\u003c\/strong\u003e\u003cbr\u003eALVA builds to the TASCAM pinout standard used by RME and most professional converters. The Yamaha cross cables exist specifically to bridge equipment that uses the Yamaha pinout instead.\u003c\/p\u003e\u003ch2\u003eWhy Buy From Victory Musical Instruments?\u003c\/h2\u003e\u003cp\u003eVictory Musical Instruments is an authorized ALVA and RME retailer based in Miami, Florida. Every cable ships new from the manufacturer, and we can spec a full loom against your converter and console count rather than leaving you to work out the pinouts. Call 844-687-4208 or arrange local pickup at our Miami location.\u003c\/p\u003e","brand":"ALVA","offers":[{"title":"0.5 m","offer_id":44788733902899,"sku":"AES25T-25YPro05","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/files\/AES25Y-25T05_8c27ca80-e1c7-4503-878f-9ac3ba6797d5.jpg?v=1787852265"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1768\/9095\/collections\/images_12.jpg?v=1787852466","url":"https:\/\/www.victorymusical.com\/collections\/alva.oembed","provider":"Victory Musical Instruments","version":"1.0","type":"link"}