Backed by us. Trusted by you.
Victory isn't given. It's earned.
We build our own instruments and carry the pro audio and video brands we trust, for everyone from first-timers to working pros, from your garage to the big stage. Started in 2017.
The FEUR FU-PRO7 is a cardioid dynamic vocal microphone with a 60 Hz to 15 kHz frequency response, 400 ohm output impedance, a die-cast metal body in dark grey with a green steel mesh grille and a 3-pin male XLR connector. It measures 7 inches, weighs 0.78 lb and ships with a carry case.
A die-cast stage microphone that survives the drop, the tour case and the next twenty gigs.
A live vocal microphone earns its money on the nights nothing goes right. The FU-PRO7 is built around that reality with a die-cast metal body rather than a moulded shell, and a steel mesh grille that takes an impact without collapsing into the capsule.
The 60 Hz to 15 kHz response is tuned for voices rather than flat measurement. The low end stops short of the rumble and handling noise that live a half octave below a singer, and the top end carries consonants and articulation without pushing sibilance forward. The cardioid pattern rejects what is behind it, which is what buys you gain before feedback when the monitors are in front of the performer.
Output impedance is 400 ohms with sensitivity at minus 50 dB, plus or minus 3 dB, at 1 kHz. That is a healthy signal into any standard preamp, console channel or interface, meaning you are not chasing the last 10 dB of gain and dragging up the noise floor with it.
At a Glance
| Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Response | 60 Hz to 15 kHz |
| Sensitivity at 1 kHz | Minus 50 dB, plus or minus 3 dB |
| Output Impedance at 1 kHz | 400 ohms, plus or minus 15 percent |
| Case Material | Die-cast metal, dark grey |
| Grille | Green steel mesh |
| Connector | 3-pin XLR male |
Who Is the FU-PRO7 For?
Live vocalists, worship leaders, MCs, karaoke hosts and anyone who needs a handheld that holds up to weekly use. It is also a solid choice for a house microphone at a venue, where the gear gets handled by whoever walks in.
Does It Need Phantom Power?
No. This is a dynamic microphone, so it needs no phantom power and no battery. Plug it into any standard XLR microphone input and it works.
What Comes in the Box?
The microphone, a microphone clip and stand adapter, a zipper storage pouch and the user manual. KIT versions add a boom stand adapter and a carry bag. Package contents can vary by region, so call 844-687-4208 if you need it confirmed for your order.
How Does It Compare to the FU-PRO8?
Same electrical specification, different size. The FU-PRO7 is 7 inches and 0.78 lb, the FU-PRO8 is 8 inches and 0.89 lb. The choice comes down to how the microphone feels in the hand and how it sits on a stand.
Where Is the FU-PRO7 Used?
FEUR lists these as the professional applications for this model:
- Live Vocal Performance
- Concert Sound Systems
- Karaoke and Events
- Public Speaking
- Churches and Worship
- DJ Shows
- Studio Practice
Specifications
| Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Response | 60 Hz to 15 kHz |
| Sensitivity at 1 kHz | Minus 50 dB, plus or minus 3 dB |
| Output Impedance at 1 kHz | 400 ohms, plus or minus 15 percent |
| Case Material | Die-cast metal, dark grey |
| Grille | Green steel mesh |
| Connector | 3-pin XLR male |
| Length | 7 inches |
| Net Weight | 0.78 lb |
| Included | Carry case |
Certifications and Industry Recognition
| NAMM Member | Member of the National Association of Music Merchants, the global trade association for the music products industry. |
| USA Verified | Manufactured and quality checked under FEUR's USA verification standards. |
| CE Marking | Compliant with European Union safety, health and environmental protection directives. |
| RoHS Compliant | Free from restricted hazardous substances under the RoHS directive. |
| FCC Compliance | Compliant with applicable FCC regulations for wireless audio transmission. |
Why FEUR?
FEUR was founded in Germany by a team of engineers and sound specialists who set out to make professional audio equipment that performs at a high level and stays within reach of the people who actually use it every week. Where most of the industry aims either at high-end studio work or at the bottom of the market, FEUR builds for the working middle: independent artists, houses of worship, schools, mobile operators and installed systems that need gear to show up and work every week.
Frequently Asked Questions
Is this a genuine FEUR product?
Yes. Victory is a veteran owned dealer in Miami and units ship new in original packaging.
Does the FU-PRO7 come with a warranty?
Yes. It carries the FEUR manufacturer warranty against defects in materials and workmanship. Keep your invoice and call us at 844-687-4208 if you ever need service.
Will it work with a standard microphone cable?
Yes. It uses a 3-pin male XLR connector, so any standard balanced XLR microphone cable connects it to a mixer, interface or powered speaker.
Is it good for recording as well as live?
Dynamic microphones record voices well, particularly loud sources and untreated rooms where a condenser would pick up too much of the space. It will not have the top end detail of a studio condenser, but it is honest and it is quiet.
Does it come with a stand clip?
Yes. A microphone clip and stand adapter ships in the box along with a zipper storage pouch and the manual.
Which FEUR microphone is best for live vocal performance?
All FU vocal microphones feature cardioid polar patterns optimized for live stage use. The FU-603 and FU-629 offer 600 Ω output impedance for ideal compatibility with professional mixing consoles. The FU-658SW adds an on/off switch for presenters who frequently mute between speaking moments.
Do these microphones require phantom power?
No. All FU dynamic microphones are passive devices requiring no external power supply or phantom power from the mixing console.
What polarity standard do FEUR microphones follow?
All FEUR microphones adhere to IEC 60268-4 polarity convention: positive acoustic pressure on the diaphragm produces positive voltage on pin 2 of the XLR output, ensuring phase compatibility across professional audio systems.
Why Victory Musical Instruments?
Victory Musical Instruments is a veteran owned pro audio and musical instrument dealer based in Miami, Florida. We are working musicians and certified audio engineers, not a fulfillment warehouse, so when you call us about a wireless system or a mixer you are talking to someone who has actually run one at a gig. Every unit ships new in original manufacturer packaging. Call us at 844-687-4208 and we will help you spec the right thing the first time.