Backed by us. Trusted by you.
Victory isn't given. It's earned.
We build our own instruments and carry the pro audio and video brands we trust, for everyone from first-timers to working pros, from your garage to the big stage. Started in 2017.
Focusrite RedNet HD32R is a 1U Pro Tools HD to Dante bridge that gives a Pro Tools HD system 32 x 32 channels of Dante audio at up to 96 kHz, or 16 x 16 at 176.4 and 192 kHz.
Puts a Pro Tools HD rig directly on a Dante network.
Overview
RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports. Dual Ethernet ports with locking etherCON connectors are provided, with several operating modes including daisy-chaining and redundancy confirmed by front-panel indicators.
Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Power state is indicated both remotely and on the front panel. The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.
HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either.
Simply connect the HD32R to Pro Tools|HD with standard Mini DigiLink connectors. HD32R allows the use of the low latency performance of Pro Tools|HD cards, bringing the full benefits of Dante audio-over IP networking and the RedNet product range to a Pro Tools|HD system. The entire range of Dante-compatible products including the superb RedNet analogue and digital interfaces can then be used with a Pro Tools|HD system, all connected via Ethernet cable.?
RedNet HD32R at a Glance
| Supported Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit |
| Clock Sources | Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master |
| External Word Clock Range | Nominal sample rate ±7.5 |
| Channel Count | 32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz |
Who Is the RedNet HD32R For?
Pro Tools HD studios and post facilities using Dante.
RedNet HD32R Specifications
| Digital performance | |
| Supported Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit |
| Clock Sources | Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master |
| External Word Clock Range | Nominal sample rate ±7.5 |
| Channel Count | 32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz |
| Rear panel connectivity | |
| Primary Port | 1 x Mini DigiLink |
| Expansion Port | 1 x Mini DigiLink |
| Word Clock Input | 1 x BNC 75Ω port (switchable termination) |
| Word Clock Output | 1 x BNC 75Ω port |
| PSU | 2 x IEC Inputs with retaining clips |
| Network | 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors |
| Network modes | |
| Redundant | Allows unit to connect two independent networks |
| Switched | Connects both ports to integrated network switch allowing daisy-chaining of device |
Why Focusrite?
Focusrite is a British pro audio company whose ISA preamp design goes back to the Focusrite Studio Console. Its Scarlett, Clarett+, Vocaster, ISA, Red and RedNet ranges cover everything from a first home recording to Dante networks in broadcast and professional studios.
Frequently Asked Questions
How many channels does it carry?
32 x 32 at up to 96 kHz, and 16 x 16 at 176.4 and 192 kHz.
What clock sources can it use?
Internal, word clock, Loop Sync or the Dante network master.
Is this a genuine Focusrite product?
Yes. Victory is a veteran owned dealer and units ship new in original packaging.
Is it covered by a warranty?
Yes. It is covered by the Focusrite manufacturer warranty.
Why Victory Musical Instruments?
Victory Musical Instruments ships Focusrite interfaces, preamps and Dante equipment nationwide with free shipping. For help choosing an interface or planning a system, call 844-687-4208.