Skip to product information
1 of 1

IK Multimedia AXE I/O ONE 2x3 USB-C Audio Interface with Guitar Tone Shaping

IK Multimedia AXE I/O ONE 2x3 USB-C Audio Interface with Guitar Tone Shaping

IK Multimedia

SKU:IP-INT-AXEIOONE-IN

Regular price $129.99 USD
Regular price Sale price $129.99 USD
Sale Sold out
Shipping calculated at checkout.
We may source this item to order, so if your timing is tight, call 844-687-4208 to confirm availability.
Pay As You Play
Lease to own
Pay monthly
View full details
The Victory Standard

Backed by us. Trusted by you.

Victory isn't given. It's earned.

We build our own instruments and carry the pro audio and video brands we trust, for everyone from first-timers to working pros, from your garage to the big stage. Started in 2017.

Overview

IK Multimedia AXE I/O ONE is a compact USB-C audio interface for guitar recording with one Class-A discrete microphone preamp, a variable impedance instrument input, balanced monitor outputs and a dedicated amp output with ground lift. Conversion is 24-bit at sample rates to 192 kHz, with 108 dB dynamic range across the inputs and outputs.

The guitar input from AXE I/O, in a smaller box.

Free shipping · Free local pickup in Miami · Financing at checkout

AXE I/O ONE keeps the part of AXE I/O that matters most to a guitar player and drops the channel count. The instrument input uses the same multiple topology preamp with variable impedance, sweeping from 1 MOhm down to 2.2 kOhm in passive mode and sitting at 10 kOhm in active mode, so pickup loading remains a tone control rather than a fixed value.

It also keeps the PURE and JFET input stages. PURE measures 0.0018 percent THD at -1 dBFS for a transparent capture. JFET runs at 0.42 percent, deliberately, adding the harmonic content of a valve style input stage before the signal reaches the converter. That is an analog decision made once, not a plug-in applied afterwards.

One Class-A discrete microphone preamp with 4 kOhm differential impedance covers vocals and amp mics, balanced monitor outputs run at 150 Ohms, and output 3 is the amp output with selectable ground lift for reamping. The host connection is USB Type-C.

At a Glance

Type Compact USB-C audio interface for guitar recording
Conversion 24-bit A/D and D/A
Sample rates 44.1, 48, 88.2, 96, 176.4 and 192 kHz
Mic preamp 1x Class-A discrete differential, 4 kOhm, 108 dB dynamic range
Instrument input 1 MOhm to 2.2 kOhm passive, 10 kOhm active, PURE and JFET modes
Monitor outputs Electronically balanced, 108 dB dynamic range
Amp output Unbalanced floating with selectable ground lift
Host connection USB Type-C

What Is the Difference Between PURE and JFET Modes?

PURE is a transparent input stage at 0.0018 percent THD. JFET deliberately runs at 0.42 percent, adding harmonic content in the same way a valve input stage does. It is an analog color applied before conversion, so it behaves under the fingers rather than after the fact.

How Much I/O Does AXE I/O ONE Have?

One microphone input, one instrument input, two balanced monitor outputs, one amp output with ground lift and a headphone output. Two in and three out, over a single USB-C connection.

Who Is AXE I/O ONE For?

Solo guitar players recording one source at a time who still want a proper instrument front end and a reamp output. Also a good travel interface, since it connects over USB-C and takes very little desk space.

What Comes in the Box?

The AXE I/O ONE and a 1.5 m USB-A to USB-C connection cable.

Connections

Mic input XLR, Class-A discrete, 4 kOhm differential
Instrument input Multiple topology preamp, variable impedance
Line outputs 1-2 Balanced monitor outputs, 150 Ohm balanced or 75 Ohm unbalanced
Output 3 Amp output, unbalanced floating with ground lift, 75 Ohm
Headphones Zero-Ohm source until clipping, +5 dBu into 50 Ohms

Specifications

Mic frequency response 9 Hz to 45 kHz within 0.5 dB at 96 kHz
Instrument frequency response 11 Hz to 45 kHz within 0.5 dB at 96 kHz
Instrument THD, PURE mode 0.0018 percent at -1 dBFS input
Instrument THD, JFET mode 0.42 percent
Monitor output level 0 dBFS corresponds to +12.8 dBu
Monitor THD at -1 dBFS 0.0015 percent
Amp output level 0 dBFS corresponds to -3.5 dBu

Why IK Multimedia?

IK Multimedia has been building music production hardware and software in Modena, Italy since 1996, with US operations in Sunrise, Florida. The company is behind AmpliTube, T-RackS, TONEX, the ARC room correction platform and the iLoud monitor range, and it designs its own DSP, converters and analog front ends rather than assembling reference designs.

Frequently Asked Questions

Is this a genuine IK Multimedia product?

Yes. Victory is a veteran owned dealer in Miami and units ship new in original packaging with full manufacturer support.

Is this covered by warranty?

Yes. This unit carries the full IK Multimedia manufacturer warranty, registered to you as the original purchaser. Call 844-687-4208 with the current term for your region.

Can I record guitar and vocals at the same time?

Yes. The microphone input and the instrument input are independent channels, so both record simultaneously to separate tracks.

Does it reamp?

Yes. Output 3 is a dedicated amp output, unbalanced and floating with a selectable ground lift.

How does it differ from the full AXE I/O?

AXE I/O ONE has one mic preamp instead of two, three outputs instead of five, connects over USB-C, and runs 108 dB dynamic range against 116 dB. The instrument front end and the amp output philosophy carry over.

Why Buy From Victory Musical Instruments?

Victory Musical Instruments is a pro audio and musical instrument dealer in Miami, Florida. We support churches, schools, studios and working musicians across South Florida and ship nationwide. Every unit is new in the original factory packaging with full manufacturer support. Call 844-687-4208 to check lead time, request a quote, or arrange local pickup.

Sign Up for Our Newsletter & Enjoy an Exclusive 5% Discount!

Join us to get exclusive deals and offers