Backed by us. Trusted by you.
Victory isn't given. It's earned.
We build our own instruments and carry the pro audio and video brands we trust, for everyone from first-timers to working pros, from your garage to the big stage. Started in 2017.
IK Multimedia iLoud Precision 6 MKII is a professional high-resolution studio monitor built around a 6.5 in. coated paper mid-woofer and a 1.5 in. graphene reinforced textile dome tweeter, with a fully DSP controlled 96 kHz system, 150 W RMS of custom Class-D power and ARC room calibration built in. Sold individually so rooms can be built in stereo or immersive layouts.
A reference monitor that publishes its phase response because it can afford to.
Precision MKII is IK's flagship monitor line, designed and voiced in Italy. The whole signal path runs at 96 kHz under DSP control, with a 6th order linear phase crossover and power amplifier distortion held to 0.005 percent at nominal power. Unit to unit consistency is specified at plus or minus half a decibel, which matters when you are matching eleven speakers rather than two.
Every acoustic adjustment you would normally make with outboard gear is on board: a high pass filter at 35, 50, 65 or 80 Hz, low frequency contour from -10 to +6 dB, desk contour from -10 to 0 dB, mid contour plus or minus 4 dB, high frequency contour plus or minus 6 dB, plus input gain trim and up to 10 ms of adjustable delay for aligning speakers in a multichannel room.
ARC X is IK's room correction platform. The monitor measures the room with the ARC microphone, builds a correction profile and applies it inside its own DSP, so the correction travels with the speaker instead of living in a plug-in on one computer. Precision MKII adds a hardware remote so voice selection and the measurement process can be driven from the listening position rather than the keyboard.
At a Glance
| Mid-woofer | 6.5 in. ultralight coated paper |
| Tweeter | 1.5 in. graphene reinforced textile dome |
| Total power | 150 W RMS |
| Frequency response | 45 Hz to 22.5 kHz plus or minus 1 dB |
| LF extension | 37 Hz at -4 dB |
| Peak SPL | 115.2 dB free field at 1 m, 117.2 dB half space |
| Continuous SPL | 103 dB free field at 1 m |
| Crossover | 1.35 kHz, 6th order linear phase |
| Size and weight | 35.3 x 20.1 x 28.2 cm, 13.89 x 7.91 x 11.1 in., 7.9 kg |
What Makes iLoud Precision 6 MKII a Reference Monitor?
Three things you can measure: a frequency response held within one decibel across the band, a phase response that stays coherent from 150 Hz up, and unit to unit consistency of half a decibel. Most monitors publish the first. The second is what makes transients and stereo imaging trustworthy, and the third is what makes a multi-speaker room behave.
Who Is iLoud Precision 6 MKII For?
Mixing and mastering engineers, post production rooms, and studios building immersive layouts where every speaker has to match. The onboard delay and contour controls plus ARC correction mean the monitor can be tuned into an existing room rather than requiring the room be rebuilt around it.
What Comes in the Box?
One iLoud Precision 6 MKII monitor, power cord, ARC measurement microphone and clamp, a 2.5 m USB-B to USB-A cable, and a set of four iLoud Isolation Pods. Unlike the smaller iLoud models, the measurement microphone ships with every single unit.
Can I Control It From the Listening Position?
Yes. The iLoud Precision Remote Control handles ARC X voice selection and drives the measurement process from where you actually sit. It is a separate accessory.
Connections
| Input | Balanced analog input |
| Data | USB Type-B for ARC X control |
| Calibration | ARC measurement microphone input |
| Power | IEC power inlet |
Specifications
| LF power amp, short term | 120 W |
| HF power amp, short term | 30 W |
| Sensitivity | -4 dBu produces 90 dB SPL |
| Phase rotation at 100 Hz | 45 degrees max with the high pass filter off |
| Total latency | 2.46 ms |
| Adjustable delay | 0 to 10 ms |
| High pass filter | Off, 35, 50, 65 or 80 Hz |
| Contours | LF -10 to +6 dB, desk -10 to 0 dB, mid plus or minus 4 dB, HF plus or minus 6 dB |
| Input gain trim | Plus or minus 5 dB |
| Unit to unit consistency | Plus or minus 0.5 dB |
| Power amp distortion at nominal power | 0.005 percent |
| Operating temperature | 0 to 35 C, non condensing |
Why IK Multimedia?
IK Multimedia has been building music production hardware and software in Modena, Italy since 1996, with US operations in Sunrise, Florida. The company is behind AmpliTube, T-RackS, TONEX, the ARC room correction platform and the iLoud monitor range, and it designs its own DSP, converters and analog front ends rather than assembling reference designs.
Frequently Asked Questions
Is this a genuine IK Multimedia product?
Yes. Victory is a veteran owned dealer in Miami and units ship new in original packaging with full manufacturer support.
Is this covered by warranty?
Yes. This unit carries the full IK Multimedia manufacturer warranty, registered to you as the original purchaser. Call 844-687-4208 with the current term for your region.
Is this one speaker or a pair?
One. iLoud Precision 6 MKII is sold individually so stereo, surround and immersive rooms can be specified exactly. Order two for a stereo pair.
Is the ARC measurement microphone included?
Yes. Every Precision MKII ships with the ARC microphone and clamp, along with four isolation pods.
Can these be mounted on stands or brackets?
Yes. A dedicated mounting bracket is available for this model. Order the bracket that matches the cabinet, since the 5, 6 and MTM versions each use their own.
Why Buy From Victory Musical Instruments?
Victory Musical Instruments is a pro audio and musical instrument dealer in Miami, Florida. We support churches, schools, studios and working musicians across South Florida and ship nationwide. Every unit is new in the original factory packaging with full manufacturer support. Call 844-687-4208 to check lead time, request a quote, or arrange local pickup.