The EVNO SPX1-W2 Wireless Soprano Microphone system is meticulously handcrafted in the USA to provide the most natural reproduction of sound. A single microphone over the key design allow for the most gain possible in a wireless setup. The SPX1-W2 package includes the SPX1 microphone with the EVNO W2 Dual wireless system capable of using two microphones / transmitters active at the same time.

The microphone is designed specifically for soprano saxophone. A bell mounted single setup designed to produce the most gain before feedback. The single microphone design is geared to be light weight in design while allowing the most crucial area of the instrument to be reproduced in a single microphone design. The SPX1 microphone design is tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone.

The SPX1 is the perfect choice for higher volume settings for solo performance, principal soloist’s in all genres, to high energy horn section bands of all styles. The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments. The SPX1 is the ideal choice for soprano players also playing in a section and who may also want to use on alto, tenor, or Bari as well. Removing the microphone from its extension shaft and re-positioning the microphone body on to an alto, tenor, or bari bell is possible.

The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement. The microphone is easy to clamp on and take off the bell with a spring loaded clamp while always being attached at the perfect height. The clamp is attached to the instrument with a loaded spring but also includes a reinforcement screw if your movement on stage is extreme. The SXCL clamp also allow the player to use the same clamp with the Evno SX tenor, alto, and baritone saxophone microphone as needed with the SX tenor, alto and Bari microphone. The SPX1 Stay-Flex gooseneck, designed in the USA, holds position as desired while being lightweight in design. The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself. Suspended in a standard variable 7 point suspension ring, the microphone allows for simple and easy replacements of the O rings as needed. The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time. This allows for the player to use any combination of Evno microphones wireless at the same. A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe. Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ and volume over each channel. The W2 offers a Diversity antenna system which provides a distance at about 100meters.

The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output. A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit. The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.

Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR. Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system. The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.

The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions. **see chart below for more information.

The W2 system is shipped with a rack-kit, antennas, power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.

The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience.

The complete Evno SPX1-W2 setup includes the Evno SPX1 microphone, Evno SXCL Clamp, W2 Dual wireless receiver, A1 transmitter, power supply and rack kit.